Awesome Image

Industrial Lashing & Load Securing UAE | TPS

A crate can be perfectly built and still arrive damaged if it moves inside the truck or container. Total Packaging Solutions (TPS) has provided logistic packaging services across the UAE since 2009, holds ISO and ICV certification, and offers industrial and logistical lashing as a dedicated service from its base in Musaffah, Abu Dhabi. Packing and securing are two separate jobs, and both need to be done properly. If you have a heavy or high-value load going out soon, WhatsApp or contact us and we will tell you how it should be secured.

Why Packed Cargo Still Gets Damaged

Most people think of damage as something that happens to a box. In transport, a lot of damage happens because the load is not held in place. Cargo experiences forces during every journey:

  • Braking and acceleration push the load forward and backward.
  • Turning pushes it sideways.
  • Bumps and road vibration make it bounce and slowly work loose.
  • At sea, rolling and pitching add constant movement over days or weeks.

A loose load does not need to move far to cause problems. A few centimeters of shift can crack a crate, bend a frame, or damage the equipment inside.

What Lashing and Load Securing Actually Means

Load securing is the process of fixing cargo to the vehicle, container or pallet so it cannot slide, tip or fall. Lashing is the part that uses straps, chains or steel bands to hold the load down and in place.

In practice, a secure load usually combines several methods:

  • Lashing. Straps, chains or steel bands that tie the cargo to anchor points.
  • Blocking and bracing. Timber or other supports fitted around the cargo to stop it sliding.
  • Friction control. Anti-slip mats or similar material under the cargo to reduce movement.
  • Edge and corner protection. Guards that stop straps from cutting into crates or equipment.
  • Wooden saddles and supports. Cradles that hold cylindrical or rounded items such as pipes and drums so they cannot roll.

The right mix depends on the weight, shape and center of gravity of what you are moving.

Matching the Method to the Cargo

Different loads need different approaches:

  • Heavy machinery. Usually needs chains or heavy-duty straps to certified anchor points, plus blocking to stop sliding.
  • Crated equipment. Needs the crate secured as a single unit, with straps protected at the corners so they do not crush the timber.
  • Pipes and cylindrical items. Need saddles or chocks so they cannot roll, then lashing over the top.
  • Palletized loads. Need to be held to the pallet and the pallet held to the vehicle, so both layers stay together.
  • Tall or narrow items. Need extra attention to tipping, because their center of gravity is high.

Common Lashing Mistakes

These are the problems that show up most often on heavy and export loads:

  • Using the wrong strap or chain. Every lashing device has a rated capacity, and it needs to match the load. Using something undersized is one of the most common causes of failure.
  • Lashing to weak points. Straps tied to anything other than rated anchor points can fail or damage the vehicle.
  • No edge protection. Tension over a sharp corner can cut a strap or crush a crate.
  • Too few lashings. One strap across the top is rarely enough for a heavy load.
  • Never rechecking. Loads settle during the first part of a journey, and straps that were tight at loading may be loose after a few kilometers.
  • Securing the crate but not what is inside it. If the equipment can shift within its own crate, the outer lashing does not help.

A Scenario We See Regularly

A manufacturer ships a heavy machine in a well-built wooden crate. The crate is loaded onto a flatbed with two straps over the top and no blocking at the front. During a hard stop on the highway, the crate slides forward into the headboard. The crate frame cracks and the machine inside is knocked out of alignment.

The packing was sound. What was missing was blocking and enough lashing points to keep the crate from moving. A few additional straps and a timber block would have cost far less than the repair.

What Good Load Securing Looks Like

  • The load is assessed first, including weight, dimensions and center of gravity.
  • Lashing equipment is chosen to match the load, not what happens to be available.
  • Straps and chains are attached to proper anchor points.
  • Corners and edges are protected.
  • The cargo is blocked from sliding in every direction, not just forward.
  • Lashings are checked again after the vehicle has started moving.

Frequently Asked Questions

What is the difference between packing and lashing?

Packing protects the cargo itself with crates, cushioning and barriers. Lashing secures the packed cargo to the vehicle or container so it cannot move during transport.

Why does cargo shift even when it is packed properly?

Braking, acceleration, turning and road vibration all apply force to the load. Without proper lashing and blocking, even a heavy crate can slide or tip.

What materials are used for industrial lashing?

common options include steel strapping, polyester webbing, chains and load binders. The right choiceC depends on the weight and type of cargo, and edge protection is added where straps cross sharp corners.

Does Total Packaging Solutions provide industrial lashing in Abu Dhabi?

Yes. TPS offers industrial and logistical lashing solutions as a dedicated service, alongside its crating, pallet and export packaging work.

Good packaging protects cargo from the outside world, and good lashing protects it from itself. A load that can move will eventually damage something, no matter how well the crate is built. Match the securing method to the cargo, use rated equipment and anchor points, and check the lashings once the journey has begun.

Total Packaging Solutions (TPS) handles packing and securing together, so your cargo is protected before it is loaded and held in place after. WhatsApp or contact our team to discuss how your next heavy load should be secured.